Glass pergola – SKYTEKS Glass
More sky, more life
SKYTEKS Glass combines a fixed glass roof with the architectural lines of Tenteks bioclimatic systems. It lets in plenty of daylight while protecting from rain, snow, hail, wind and UV radiation – so you can enjoy your balcony or yard in every season.
The roof is made of tempered and laminated glass with sealed profiles, and the system is made to measure for each project.
- Aluminum profiles 6063-T6 Designed by Tenteks
- Concealed drainage through the gutters and columns
- LED lighting built into the beams, dimmable
- Available in the 1600 and 1400 series
Dimensions and models
| Model | Width (W) | Depth (P) | Structure height (H) | Clearance height (H1) | Single module without a middle column |
|---|---|---|---|---|---|
| SKYTEKS Glass 1600 | 100–600 cm | 100–600 cm | 30 cm | 220–300 cm | 600×600 cm (36 m²) |
| SKYTEKS Glass 1400 | — | — | — | 220–300 cm | 500×350 cm (16 m²) |
Roof slope: 1°–6°. For larger areas, several modules are joined with connectors and a shared drainage system. Dimensions according to the Tenteks catalog.
Glass options
Four glass types to choose from, depending on the climate, privacy level and look you want.
For hot climatesKONFOR solar control glass
Tempered 6 mm + air gap 10 mm + laminated 4+4 mm
Reduces incoming solar heat, keeps it cool and comfortable under the roof, protects from UV radiation and helps save energy.
For cold climatesLow-E glass
Tempered 6 mm + air gap 10 mm + laminated 4+4 mm
Reduces heat loss in winter, keeps a pleasant temperature, lowers the risk of condensation on the glass and provides high thermal insulation.
ReflectiveReflective grey glass
Tempered 6 mm + air gap 10 mm + laminated 4+4 mm
Reflects part of the sun’s radiation and reduces heat. During the day it limits visibility from outside – more privacy and a modern architectural look.
Single layerLaminated glass
Laminated 5+5 mm – single layer
High transparency and strength – a simpler, more economical glass roof solution.
Technical details
Every profile, connector and installation detail is designed for strength, efficient drainage and long-lasting sealing.
Rear section
A rear facade profile connects the glass-bearing profiles to the structure and allows different roof slopes. The seals and connectors are integrated into a single profile.
Beam profile
A multi-chamber beam carries the glass panels, clamping profiles and TPE seals. For long spans, a 30×80×2 mm steel reinforcement profile is installed inside.
Beam connection
On the horizontal beams, a sealing strip and an upper U-profile guide water to the vertical beams and from there to the gutter, preventing water and dirt from building up.
Side section
The joint between the side gutter and the glass beam is sealed with TPE gaskets at two points, with a dedicated channel for an even bead of silicone at the edge.
Front section
The glass is fixed in a clamping profile with double sealing, and a wide TPE strip guides rainwater from the glass into the front gutter.
Column profile
A column weighing 5.5 kg per meter with a cover that hides the anchoring, connections and drainage, plus steel reinforcement along its length.
Ground connection
A reinforced steel flange with hidden anchors, connected to the column at six points for even load distribution and long-term stability.
Integrated lighting
An LED profile in the beam with an opal diffuser for a continuous line of light, dimmable. Optional – a Crown profile to light the upper perimeter.
Connector
Joins the beam profiles at a precise angle with no height differences, and hides the joint line for a clean, uniform look.
Renderings
Want a glass roof at your place?
Send us the dimensions of your balcony or yard and we will get back to you with a tailored offer – or design a pergola online.